reduced machine

英 [rɪˈdjuːst məˈʃiːn] 美 [rɪˈduːst məˈʃiːn]

【计】归约机

计算机



双语例句

  1. Automation execution has become more powerful with Environment based machine selection and distributed Testing for reduced manual effort and efficient machine utilization.
    自动化执行已经变得更强大,通过使用基于Environment的机器选择和分布式测试,减少了手动工作,实现了高效的机器使用率。
  2. The temperature of storehouse was reduced by grain cooling machine first, then the temperature of soybeans was reduced by centrifugal fan.
    当谷物冷却机把仓温降低到一定程度后,开启离心通风机对粮桩进行通风,进而降低粮温。
  3. Reduced merely to the level of material existence, Man becomes a machine, or a mere animal at best.
    仅仅处于物质存在等级的话,人就变成了机器,或顶多是个动物。
  4. Friction can be reduced and the life of the machine prolonged by lubrication.
    润滑能减少摩擦,延长机器寿命。
  5. The systems generally display reduced manufacturing lead time, low in-process inventory, and high machine tool utilization, with reduced indirect and direct labor.
    一般来说,FMS系统具有生产周期短、在制品库存低、机床利用率高、间接和直接劳动少等特点。
  6. Finally, practice has proved that the adoption of PLC control systems have greatly increased the machine's reliability and reduced workload of Machine maintenance staff.
    最后通过实践证明,采用PLC控制提高了万能铣床运行的可靠性,减轻了机床维修人员的工作量。
  7. The fractures reduced under the monitor of "C" arm X-ray machine and were fixed by anatomical plates.
    在C型臂X线机监视下行股骨上段纵切口,将骨折复位,解剖钢板内固定。
  8. Friction can be considerably reduced and the life of the machine prolonged by careful lubrication.
    仔细润滑机器,能大大减少磨擦而延长机器的寿命。
  9. The relationship between the drawing force of back zone of spinning frame and yarn quality is close, the short and long slubs of 100 kilo meter yarn faults can be reduced by controlling the tension and the speed of automatic winding machine and using the right electronic cleaner
    细纱机后区牵伸力的设定与成纱质量关系密切;控制好自动络筒机张力与速度、用好清纱器可有效去除10万m纱疵中的短粗节和长粗节
  10. This multi-layer fontal machine system completely conform to the request of unified terminal join-in, reduced burden of main machine, multichannel compatibility and easy extension under data centralization;
    这种多层的前置机系统,符合数据大集中对统一终端接入、减轻主机负担、多通道兼容和易扩充的要求;
  11. After the algorithm adopted certainly is clicked and compressed to sampling harmlessly, can already reduce data transmission time, Having reduced the work load of PC again, the speed of inputting the machine improved from whole.
    采用一定的算法对采样点进行无损压缩后,既可以减少数据传输时间,又减少了PC机的工作量,从整体上提高了文档录入机的速度。
  12. Then the inertia force is reduced by the inconstant acceleration, so that the static rigidity of the machine is raised and the kinetic performance of the machine is improved.
    通过变加速方法降低惯性力,提高了机床的静刚度,改善了机床的动力学性能。
  13. Results show that the life of cutters was extended, and blade materials wastage was reduced, and productivity of the rubbing and cutting machine was increased, process quality was improve.
    结果表明,结构改进显著提高了刀片的耐用性能,降低了单位生产量的刀片材料损耗,提高了揉切机的生产率,加工质量也得到相应改善。
  14. The computational results show that the amount of computation will be reduced and the machine time be saved by using the method offered by this paper.
    计算结果表明,采用本法具有计算量小和节省机器时间的优点。
  15. The testing results showed that the rise-temperature of spindle bearings can be reduced, the thermal stability of spindle axis and the machining accuracy of machine tool can also be improved.
    试验结果表明,这种热管不但能降低主轴轴承的温升,而且可大大提高主轴轴线的热稳定性,从而提高机床的加工精度。
  16. The results show the new down flow technology that is used in 34 inch exhaust lehr has been reduced BK crack rate and improved the running reliability of the machine and increased the economic benefit of company.
    实践表明,应用于34英寸排气炉设备的新型下吹风技术有效地降低了BK爆缩率,提高了设备运行的可靠性,增加了企业经济效益。
  17. With this algorithm, switch time among bottleneck machines were reduced by queuing so as to increase machine utilization rate and reduce average production time.
    在该算法中,为提高机器利用率和减少工件平均加工时间,采用了通过排序减少瓶颈机器切换时间的方法;
  18. Novel Reduced Support Vector Machine on Morlet Wavelet Kernel Function
    一种基于Morlet小波核的约简支持向量机
  19. Based on the new concept of re-arranging grinding operation area, 36% of walking distance is reduced for an operator to machine a workpiece.
    根据新方案重新布置磨削作业区,可使操作工每加工一件工件的行走距离比目前降低36%。
  20. So far as the equipment is concerned, a 32-bit RISC ( Reduced Instruction Set Computer) intelligent chip called ARM ( Advanced RISC Machine) is chosen as its MPU ( Micro Process Unit).
    测试设备方面,本仪器采用先进的32位RISC(精简指令系统)芯片ARM(具体型号:韩国三星公司出品的S3C44B0)作为微处理器。
  21. A software/ hardware interface model based on ARM ( advanced reduced instruction set computer machine) kernel CPU ( central processing unit) is designed. The definition of hardware interface, as well as the implementation of software interface is presented in detail.
    设计了一种基于高级精简指令集处理器核处理器的无线通信系统接口模型,叙述了硬件接口的定义及相应软件接口模块的实现。
  22. The design not only simplified the system but also reduced the area of machine room and initial investment.
    这种设计既简化了排风系统,又减少了机房面积和投资。
  23. To deal with the problem that support vector machine ( SVM) is restricted to work well on the small sample sets, based on the Morlet wavelet kernel function, a novel reduced support vector machine on Morlet wavelet kernel function ( MWRSVM-DC) is proposed.
    针对支持向量机(SVM)的训练数据量仅局限于较小样本集的问题,结合Morlet小波核函数,提出了一种基于Morlet小波核的约简支持向量机(MWRSVM-DC)。
  24. The support vector machine classifier was established, and the reduced characteristic vectors were sent as input into the support vector machine classifier to classify and recognize.
    建立支持向量机分类器,将约简后的特征向量作为输入送入支持向量机分类器,对特征数据进行分类识别。
  25. After the study of the subject, the subject of this research achieved the purpose of the force of cutting picks on the roller average, differences between lives reduced, the roller overall vibrates smoothly and the whole machine cutting performance improved.
    经过本课题的研究,达到了采煤机各截齿受力均匀,寿命差异减小,滚筒整体振动平稳,整机截割性能得到提高的目的。
  26. But Marx found it not so, capital operation did not give the masses of working people bring happiness, but reduced them to the slaves of machine and capital, subjectivity has completely lost.
    但马克思发现资本运作没有给广大劳动人民带来幸福,相反却使他们论为机器与资本的奴隶。
  27. Reduced the number of operating personnel, labored savings, reduced labor costs. The numerical transformation of machine has high performance and quality, It can continue to use for many years as a new CNC.
    这样就可以降低了操作员的数量,节省了劳动力,降低了劳动费用;改造后的机床性能高、质量好、还可以作为新的数控床继续使用多年。